| Specification | Unit | X2010 | X2010-1 |
| Table size | mm | 1800×680 | 2300×680 |
| Maximum working width | mm | 1100 | 1100 |
| The maximum working height | mm | 850 | 850 |
| Table travel | mm | 1800 | 1800 |
| Table load | kg | 3000 | 3000 |
| Side milling largest working height | mm | 700 | 700 |
| Side milling largest working width | mm | 1000 | 1000 |
| Vertical milling spindle taper | 7:24NT50 | 7:24NT50 | |
| Side milling spindle taper | 7:24NT50 | 7:24NT50 | |
| Outside diameter spindle nose | mm | 128.57 | 128.57 |
| Spindle travel | mm | 200 | 200 |
| Spindle speed range | r/min | 77-340 | 77-340 |
| Beam lifting speed | mm/min | 280 | 280 |
| Head rotation angle | ±45°C | ±45°C | |
| Table feed series | 無極 | 無極 | |
| Table feed range | mm/min | 17-1300 | 17-1300 |
| Head side lifting speed | mm/min | 250 | 250 |
| Vertical milling head infeed fast | mm/min | 521 | 521 |
| Vertical milling head infeed Slow | mm/min | 83 | 83 |
| Vertical milling head motor power | kw | 4 | 4 |
| Side milling motor power | kw | 4 | 4 |
| Table feed motor power | kw | 3.5 | 3.5 |
| Beam lift motor power | kw | .1.1 | 1.5 |
| Pan motor power beam | kw | 0.75 | 0.75 |
| Side axle lift motor power | kw | 0.75 | 0.75 |
| Lubrication pump motor power | kw | 0.4 | 0.4 |
| Recommended cutter diameter | mm | 250 | 250 |
| Dimensions (L × W × H) | mm | 3800×2000×2300 | 4800×2000×2300 |
| Net weight (approx) | kg | 6000 | 6500 |
